Home / News / Industry News / The composition of the fixture

The composition of the fixture

Update:31-08-2017
Summary:

1, positioning components It is in contact with the pos […]

1, positioning components
It is in contact with the positioning reference of the workpiece for determining the correct position of the workpiece in the fixture so as to ensure a relatively correct position of the workpiece relative to the tool and machine tool movement during machining. The same time as
2, clamping device
For clamping the workpiece, in the cutting of the workpiece in the fixture to maintain a fixed position. The same time as
3, knife, guide components or devices
The role of these components is to ensure that the correct position between the workpiece and the tool. The element used to determine the correct position of the tool before machining is called a tooling element, such as a knife block. The element used to determine the position of the tool and guide the tool to be machined is called a guide element.
4, connecting components
So that the fixture and the machine connected to the components, to ensure that the relationship between the machine and the fixture between the location. The same time as
5, clip specific body
For connecting or fixing the components and devices on the fixture to make it a whole base piece. It is connected with the machine-related components, the set, so that the fixture relative to the machine has a certain location. The same time as
6, other components and devices
Some fixtures according to the workpiece processing requirements, there must be indexing institutions, milling machine fixture also have positioning keys. The same time as
Above these components, not for each machine fixture are indispensable, but any fixture must have positioning components and clamping devices, they are the key to ensure the accuracy of the workpiece processing, the purpose is to make the workpiece calibration, clamping.

http://www.sufoorworkholding.com/