The lathe fixture and the lathe spindle connection more […]
The lathe fixture and the lathe spindle connection more, the specific method used in accordance with the requirements of the fixture. In general, the more common connection methods are the following four:
1, taper connection: the spindle of the lathe is tapered, can be self-made fixture and spindle taper match, this connection is not recommended, because it will damage the accuracy of the spindle, usually in a dedicated machine may appear.
2, the flange connection: A, fixture directly caught in the three claws; B, the three-jaw chuck removed, the fixture connected to the card-like installation location.
3, self-made claws: Some fixtures are to solve the problem of clamping, such as a longer set of clamping on the need for a long three claws. At this time can be made of three claws in the ordinary three-jaw chuck, the best installed from the car knife.
4, can also be seen in some places directly on the three jaws on the fixture, which is generally on the plane only.
In summary, the fixture is fixed and connected with its own actual conditions and conditions related to the fixture accuracy requirements, the amount of products, the purpose of restructuring (effect), the factory's own conditions and many other factors. Only a comprehensive consideration of these factors can be designed to produce a scientific and reasonable fixture.http://www.sufoorworkholding.com/